Top 10 Ac Vacuum Kit

Fieldpiece VP55 – 5 CFM Vacuum Pump Fieldpiece VP55 – 5 CFM Vacuum Pump x 5 CFM, two stage vacuum pump 4 Inline Ports – 1/4, 3/8 (x2), 1/2 Change Oil Quickly, Even with the Pump Running Heavy Duty Rubberized Construction Fieldpiece is leading the charge in properly performing system evacuation with its new vacuum pumps with RunQuick Oil Change System. Available in an 8 CFM DC motor (model VP85), or in a 5 CFM AC motor (model VP55), these revolutionary pumps make evacuation easier and faster. Good oil is a key ingredient of every evacuation. Clearly view your pump oil through the huge oil reservoir window to see the condition of the oil, and the system. When it’s time to change the oil, it’s quick, clean, and easy. With the RunQuick oil change system you can replace the oil in under 20 seconds, even while the pump is running without losing vacuum. Plus the extra wide base helps prevent tipping and spilling oil. Four in-line ports give you tidy hose routing for three different size hoses. Place the cord on the handle for tangle-free storage and easy hoisting.

The Kozyvacu&#174 TA500 has been performance and relibility tested to meet Kozyvacu’s high standards. Its power and capacity meets for a wide range of service applications, it delivers a high CFM rating for fast thorough evacuation.

Features:

• High torque design for easy startup and efficient operation; and a Die-Cast Aluminum Housing – Cast aluminum housings make the pumps lightweight while durable. it is easy to start and maintenance free.
• Thermally protected motor to make it durable for long time duty.
• Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining;
• Oil Fill Port – Makes adding oil simple since the port is accessible from the front or either side.
• The sight glass on the front of the pump shows you when enough oil has been added;
• High Efficiency and Low Noise
• ON/OFF Switch Non Slip Cushion Handle
• Foam molded packing for safe transportion.

Specification:

• Free Air Displacement(FAD): 5.0CFM
• Power: 1/2 HP
• Stage: 2
• Voltage/Frequency: 120V/60HZ
• Ultimate Vacuum: 0.3 PA, 25 microns
• 1/4 inch flare female x 1/2 inch Acme male
• Oil Reservoir Capacity: 380ML

Dimension and Weight:

• Net dimension and weight is 12.6×5.3×9.2 inches, 19.0pounds,
• Shipping dimension and weight is 14.2×7.1×11.4 inches, 21.0pounds

Package Included:

• 1 x Kozyvacu TA 500 Vacuum Pump
• 1 x 380ml White Oil Bottle Filled With Oil.
• 1 x User Manual

Robinair’s 15800 VacuMaster Economy Vacuum Pump is a high performance, heavy duty 2-Stage rotary vane design vacuum pump designed for commercial refrigeration use. With an 8 CFM free air displacement, factory rating to 40 microns, and 18.6 ounce oil reservoir, this unit has the capacity you need to get the job done. This robust unit features a 1 HP, 115V, 60 Hz thermally protected motor; an inlet fitting engineered for maximum airflow while preventing oil backflow; finned aluminum surfaces that dissipate heat faster (keeping pump cooler and extending life); 1/4″ & 3/8″ MFL inlet fittings; easy to read sight glass; easy access oil fill port; oil drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining, and non-skid feet. Oil included. Robinair, a Bosch Automotive Service Solutions brand, is a global leader in service tools and equipment based in Owatonna, Minnesota. Robinair is recognized throughout the world as the quality and performance leader in AC/R evacuation tools and this position has led to its success with the full range of products that serve the heating/ventilating/air conditioning/refrigeration (HVAC-R) and mobile markets, which includes the automotive aftermarket along with other industries such as agriculture and construction.

More Features:
* R12 to R134a hose
* Automotive air conditioning refrigerant replenishing pipe adapter 8 piece set
* Auto refrigerant fitting ac repair tool multifunction swivel adapter kit
* Multi-functional automotive air conditioning refrigerant conversion joints, fluoride joints, fluoride tools, table fittings, one-time to meet your car needs!

Blue hose adapter 1/4″ M to 7/16″ SAE F, with valve core and swivel. Used for R12 low side port.
Red hose adapter 1/4″ M to 3/8″ SAE F, with valve core but no swivel. Used for R12 hi side port. (On this one the seal inside mine looks a little deformed.)
90 deg adapter 1/4″ M to 7/16″ SAE F. With valve depressor. R12 low.
90 deg adapter 1/4″ M to 3/8″ SAE F. With valve depressor. R12 hi. Some older vehicles had the same fittings on both low & hi sides, so it’s useful to have two adapters.
90 deg adapter 1/4″ M to 1/4″ F. With valve depressor. The 90 deg ones are good for accessing ports where there is not a lot of clearance.
Straight adapter 1/4″ M to 1/8″ NPT M. With valve core. Could possibly be used on a gauge manifold.
Straight adapter 1/4″ M to metric 9x1mm M. With valve core. No idea what this is used for.
Big adapter. 1/4 Male fitting is fine, female fitting is too small for 1/2″ ACME, seems loose on 1/4″ flare. Has valve depressor.

Package Include:
2* Flexible Adapters
3* 90° Adapters
1* High Side Adapter
1* Male Adapter
1* Adapter

Features:

Easy to install:
The core grabber tool makes it easy to insert it into the inner valve, so you can control the core, needn’t to stop the machine or release the refrigerant, you can remove and install the valve cores conveniently.

Suitable for:
The dual size size 1/4 and 5/16 can be adapted to R22/ R134A/ R410/ R32/ R12 air-condition,and there is external bypass port design, which can remove the valve cores.

Specifications:
Quantity: 32 pieces
Color: as pictures shown
Material: brass
Size: 1/4 and 5/16 dual size

Package includes:
1 x R134A Valve core remover
1 x R410 Brass adapter
20 x Valve cores
10 x Brass nut

Note: small parts, keep away from children.