The Best Motorcycle Heat Exhaust Cooling Fan

TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.

he UPGR8 electric slim fan is lightweight, has an ultra slim design so the fan can be installed flush against your radiator, or other applications. It comes with the universal fan mounting kit which make it easy to install. The fan can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup. We have size 7″, 9″, 10″, 12″, 14″, 16″, and different colors to choose from.

Just like other major components in the car, the radiator cannot work on its own. It has supporting parts that help it perform its function more efficiently. In order for the radiator to reduce temperature of the water and coolant mixture that goes through the engine, it needs airflow that absorbs the heat and assists evaporation. Radiator fans are used to draw the air towards the radiator and help in the cooling process.

High Performance radiator fans may be used to replace your OE product for more efficient cooling. They allow more air to circulate around the radiator and they need less horsepower to operate too, making them ideal for your radiator fan replacement. Radiator Fans come with ultra slim design so the fan can be installed easily against your radiator, in the most convenient position to allow for more leniencies for other aftermarket parts.

Package Included:

American Volt high performance small slim 12V electric cooling fan. Custom upgraded 90 watt motor produces more CFM air flow volume. Fan motors are sealed to be water and dust resistant, increasing longevity. Fan is configured by default as an air puller out of the box. Durably built to be shock resistant for on-road and off-road applications. Universal design for radiators, oil coolers, transmission coolers, condensers. Includes shroud mounting feet attachments and complete mounting strap kit. Browse our store for more fan sizes and thermostat switch kits. Blade Size- 6 Inch Blade Type- Straight Motor Size- 90 Watts CFM Rating- 400 RPM Rating- 2000 Amp Draw- 8 Amps Material- Plastic Shroud/Steel Motor Dimensions- 8″ x 6.5″ x 2.5″ thickness at center x 1.25″ thickness at edge

Electric Fan:

• Dual 6 inch reversible 12 volt electric cooling fans.
• Powerful 80 watt motors will keep your engine cool.
• Configured as air pullers out of the box.
• Blade and wiring can be reversed to make the fans air pushers.
• For radiators, oil coolers, transmission coolers, condensers and more.
• Includes mounting feet attachments and tie strap kits.

Specs Per Fan:

    Blade Size
– 6 Inch    Blade Type
– Straight
    Motor Size
– 80 Watts    CFM Rating   
– 600
    RPM Rating
    Amp Draw
– 2250
– 8 Amps    Material
– Plastic Shroud/Steel Motor    Dimensions
– 8″ x 6.75″ x 2.5″ thickness at center x 1.5″ thickness at edge

Thermostat Kit:

• Universal fit for any automotive vehicle.
• Activates up to (2) fans with maximum 25 amp draw.
• 180’F turn-on temperature, 165’F turn-off temperature.
• 3 inch push-in probe temperature sensor.
• Probe is pushed through radiator fins.
• AC/Manual override circuit.
• Installation instructions included.

Kit Includes:
(1) – 180’F Thermostat Switch (1) – 3″ Brass Push-in Probe (1) – Wiring Harness (1) – 60 Amp Relay (1) – 30 Amp Fuse (1) – Large Ring Terminal (3) – Small Ring Terminals (2) – Butt Connectors (4) – 4” Wire Ties (2) – Female Connectors (4) – Sheet Metal Screws (2) – Wire Tap Connectors