We spent many hours on research to finding one inch tall water cooling pc, reading product features, product specifications for this guide. For those of you who wish to the best one inch tall water cooling pc, you should not miss this article. one inch tall water cooling pc coming in a variety of types but also different price range. The following is the top 10 one inch tall water cooling pc by our suggestions
714 reviews analysed
1. Zopsc DIY Compputer Water Cooling Kit with 240mm Heat Sink, LED Fan, CPU/GPU Block, Water Pump Reservoir,Transparent Hose, etc
- CPU / GPU Block: The CPU/GPU block is constructed with a copper base to provide exceptional heat transfer and cooling performance.
- Cylindrical Water Reservoir: The cylindrical water reservoir is manufactured from high quality transparent acrylic so that the circulation system is visible.
- Water Pump: Waterproof, stable, high quiet, long life. 240mm Heat Sink: Provide the excellent heat dissipation, as you need for highly overclocked desktop processors.
- Transparent Hose: Upgraded flexible anti-explosion, hoses enable a space-saving installation and exceptional durability.
- LED Fan: The extreme performance dual fans offer a high air static pressure with lower noise.
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass
3. Universal GPU block
Interface: G1 / 4 universal thread, diameter of 12.9mm
Material: Bottom: copper; Cover: POM high temperature materials
Waterway: 0.8MM parallel waterway
Compatibility: Matches a fan with a distance of 53 mm to 61 mm
Supported tube: 9.5mm ID / 12.7mm OD PU tube, or 10mmID / 16mmOD solid tube, or 8mmID / 12mmOD silicon tube (ID is the inner diameter, OD is the outer diameter)
4. Cylindrical Water Reservoir (including plastic bracket * 2, metal bracket * 2, screw pack * 1):
Water reservoir height: about 160mm
Water reservoir diameter: 5cm
Water reservoir interface: G1 / 4 universal thread
Interface diameter: 12.9mm
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs
2. Thermaltake Pacific DIY LCS 1000mm Lengths V-Tubler PETG Hard Tubing (4-Pack) OD 16mm (5/8") x ID 12mm (1/2") CL-W116-PL16TR-A
Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.
Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.
- Material: PETG
- Inside Diameter: 12 mm
- Outside Diameter: 16 mm (5/8”)
- Length: 100 cm *4
- Color: Transparent
3. IronBuddy 2Pcs G1/4” Pass Through Fitting Bulkhead Top Water Injection Fill Fitting Connector for PC Water Cooling System (Black)
- ✬Material – The Pass Through Fitting is made of nickel plated brass material, prevent rust and durable to use.
- ✬Size -The hand screwing part is 25mm (about 1 inch), the external thread is 19.70mm (about 3/4 inch), the internal thread is standard G1/4, the thread inner diameter is 11.50mm(about 1/2inch), and the internal thread runs through the entire joint, which can clamp and fix the maximum 6.50mm(1/4 inch) plate.
- ✬Application – Bulkhead Fitting can be used for he connection of the internal or external joints of the cabinet or water tank. Great for PC Water Cooling System.
- ✬Color – Black.
- ✬ Package included – 2pcs G1/4 Pass Through Fitting.
IronBuddy 2Pcs G1/4 Pass Through Fitting can be used when you need to route your liquid cooling loop through one of your case panels. Can be used to better route tubes internally in your case, or externally if you want to add additional components (such as radiators) to your loop that won’t fit in your chassis. Great for computer water cooling system.
Thread Size: G1/4”.
Size: 25*15.8mm / 1*0.6inch. (Diameter*Height)
Package included: 2Pcs G1/4 Pass Through Fitting.
4. DIYhz Water Cooling Computer Radiator, 120 Pipe Aluminum Heat Exchanger Liquid Cooling Radiator Heat Sink 240mm for CPU PC Laser Water Cool System DC12V Black
- ★ Product Name: Water Cooling Radiator
- Outer Size: 275 x 120 x 30mm / 10.83” x 4.72” x 1.18”(L*W*H), Weight: 323g.
- ★ Fan Installation Size: 120 x 120 x 2(This product does not have a fan)
- Fitting Thread: G1/4 Inch
- Tube Quantity: 12
- Rated Voltage: DC12V.
- ★ Efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation.
- ★ Made of pure aluminum fins with good heat dissipation, Using the black oxidation paint to increase the thermal efficiency.
- ★ Applicable to computer CPU, industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.
DIYhz Water Cooling Computer Radiator
– Color: Black
– Tube Quantity: 12
– Weight: 323g
– Material: Aluminum
– Mouth: 9.5 (D) mm
– Fitting Thread: G1/4 Inch
– Fin Density: 18 lines per inch
– Model Number: 120mm x 120mm x 2
– Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”
– Outer Size: 275 x 120 x 30mm / 10.83” x 4.72” x 1.18”(L*W*H)
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D)
– Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)
– Material: Metal
– Pure aluminum fins
– Parts brazing seal as a whole
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler
– Can be installed 120mm x 2 fan, mounting hole size: 109.5（D）×109.5（W）mm
★ Optimized for high performance at low cost, No weak welds nor leakage.
★ Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.
1 x Water Cooling Radiator (This product does not have a fan)
1 x 1m Silicone tube
8 x Short screw
8 x Long screw
5. Alphacool Alphacool Eiskoffer Professional Bending & Measuring Kit
The Alphacool Eiskoffer is perhaps the most comprehensive collection of tools for bending 13mm or 16mm diameter HardTubes into nearly any form ever assembled. Inside the large, elegant, and sturdy case, each tool has its own separate place. All the tools are clearly arranged and neatly organised. The rubberised gloves ensure you always have a good grip on things, while also protecting you from splinters and dirt. The deburring tool is perfect for smoothing down HardTubes. Deburring is mandatory if you want the HardTubes to fit into their connectors properly. A long, sturdy saw and a mitre box serve to simplify cutting the HardTubes. The mitre box can be fastened to a table edge with special screw clamps, which are included. The inside of the mitre box is rubberised to prevent scratches and to keep the HardTubes from sliding around. The comprehensive set of measuring tools makes it easy to measure not just length, but also two or more angles at the same time. This tremendously simplifies the planning and execution of complicated bending sequences. In order to get the perfect bend each time, a substantial palette of bending radii and angles can be attached to the bending plate. The basis for this is formed by two different sizes of bending mandrels and arc mandrels. This allows you to bend HardTubes to any classic bending radius. The fitting stoppers can be used to simulate the depth of an Alphacool fitting on the end of the tube. This means an exact measurement and a perfect bend are always guaranteed when using Alphacool products. Alternatively, the straight mandrel with a stylus stopper can be used if you are using other products. The bending plate has a section that can accommodate self-designed or highly specialised bends. The case contains special flex mandrels that can be positioned in nearly any way. Model: 29131.
6. Corsair Hydro X Series Xf Compression 10/13mm (3/8"/ 1/2") ID/OD Fittings Four Pack
- Dual 140mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build.
- 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans.
- A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks.
- High-quality matte Black polyurethane coating delivers a flawless finish to match your system.
- Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.
Corsair Hydro x series XF compression fittings are the perfect fit for your soft tubing custom cooling system, Machined from solid brass and clad in a range of durable finishes. Compatible with 10/13mm (3/8″/ 1/2″) ID/OD soft tubing and equipped with a ultra-tight compression compression fitting to securely seal your loop. Tech Support # 1-888-222-4346 opt #1
7. Alphacool 17387 HF 13/10 Compression Fitting G1/4 – deep Black Sixpack Water Cooling Fittings
Alphacool connectors are breaking new ground in form, design, colour, and variety. The newest innovation is an outstanding inner diameter that really earns the descriptor “high flow”! The first 3 colours, chrome, deep black and shiny copper, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool tubing! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. Model: Straight Compression Fitting 13/10mm This connector has a ¼” thread on one side and is compatible with 95% of all components. The other side fits a 13/10 hose. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: deep black Dimensions: Width: D20mm Height: 23mm Scope of Delivery: 1x Alphacool HF 13/10 Compression Fitting G1/4 – Deep Black Sixpack This product has been tested for you:
8. Thermaltake Pacific DIY LCS PR22 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified Pom Pmma Cooling CL-W081-PL00BL-A
- Sturdy and durable design: featuring 6mm thick of the pipe wall, pacific pr Series can sustain the maximum pressure up to 99 psi (pounds per square inch). easily open out the top cap for cleaning.
- Driven performance: maximum discharge up to 500L/hr for efficient cooling of your components. Top cap supports rubber washers for a proper seal, including two predrilled G1/4” Ports for fittings.
- Heat-resistant acrylic Tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. High quality acrylic (PMMA) Tube maximum working temperature: 131℉ (55℃).
- Easy and flexible application: along with two brackets connected to both ends, pacific pr Series is Solid hold inside the chassis and allows enthusiasts to build up superior water cooling
- The pacific pr Series can be installed either horizontally or vertically, making the chassis out of the ordinary!
Thermaltake introduces the Pacific PR Series pump with tube reservoir set for the ultimate in custom PC water-cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22 is manufactured from High quality POM and PMMA Material to provide a crystal clear, High performance, and durable solution. By giving users ideal mounting, fitting and flow, the Pacific PR Series is the right choice for PC enthusiasts. 300ml capacity; 500 L/HR maximum flow rate. 2 Year Warranty.
9. CORSAIR Hydro Series H80i v2 AIO Liquid CPU Cooler, 120mm Thick Radiator, Dual 120mm SP Series PWM Fans, Advanced RGB Lighting and Fan Software Control
- Extra-thick 120mm radiator: a depth of 49mm provides more surface are for rapid cooling
- Improved cold plate and pump design: better efficiency gives you lower temperatures with less noise. Sound Blaster X-FI MB5+ALC 1220 1200b SNR HD Audio. Compatibility- Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4, AMD TR4 (Purchase TR4 bracket CW-8960049)
- Advanced SP120L PWM fan design: better high-static pressure air delivery and customizable speed
- Built-in Corsair Link: monitor CPU and coolant temperature, adjust fan speed, and customize lighting directly from your desktop.AM4 bracket not included. Please visit the Ryzen page on the Corsair website to order a free AM4 retention bracket
- Fan airflow: 77 CFM. Radiator Dimensions 154mm x 123 mm x 49mm
Hydro Series H80i v2 is an all-in-one liquid CPU cooler with an extra-thick 120mm radiator and dual SP120L PWM fans for cooling that’s far superior to stock CPU cooling fans. Liquid cooling simply works better than air cooling, and the self-contained design of the H80i v2 makes it easy for you to protect your valuable CPU. The H80i v2 has Corsair Link built in. Just attach the included cable to a USB header on your motherboard and download the free Corsair Link software, and you can monitor CPU and coolant temperatures, adjust fan speeds, and customize the LED lighting directly from your desktop . Cooling Socket Support Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4, AMD TR4 (Purchase TR4 bracket CW-8960049)
Fan Dimensions 120mm x 25mm
Fan Speed 2435 RPM
10. RDEXP Black Aluminum Fittings G1/4 Thread Soft Tube Barb Connector for Computer Water Cooling BT Part Set of 6
- Easy and conveniently to use and install.
- Compact and flexible, easy to screw on and off,Chromium plating on the surface.
- Having hidden silicone ring, perfect for connection and seal, light and delicate.
- Suitable for connection between water blocks, radiators, water pumps, reservoir and other water cooling system kit.
Brand name: RDEXP
Interface Diameter: 12mm
Interface Length: 25mm
Tube Inner Diameter:9.5mm
Size: 25x12mm/0.97×0.46 inch(LxD)
1.Easy and conveniently to use and install.
2.Compact and flexible, easy to screw on and off,Chromium plating on the surface.
3.Having hidden silicone ring, perfect for connection and seal, light and delicate.
4.Suitable for connection between water blocks, radiators, water pumps, reservoir and other water cooling system kit.
6 x Water Cooling Connector
Each item with a unique Manufacturing Part Number label on the inner package to confirm it is the qualify checked and genuine item sold from our store,when you have any questions,please provide us the MPN label first.
By our suggestions above, we hope that you can found One Inch Tall Water Cooling Pc for you.Please don’t forget to share your experience by comment in this post. Thank you!