963 reviews analysed
1. Waring Commercial WVS50 Pistol Vacuum Sealing System, 8.2 x 5 x 8.2 inches, Black
- Pistol style easy operating handheld vacuum sealer
- Heavy-Duty enclosed storage / charging base
- Seal up to 50 bags with one full charge
- Trigger operation allows for vacuuming delicate and softer products
- Includes 25 one-quart and 25 one-gallon storage bags that re microwave safe boil safe and perfect for sour vide cooking
Heavy duty commercial vacuum sealer. The vacuum sealer is cordless and rechargeable. This heavy duty commercial sealer can seal up to 50 bags on one charge. This sealer is excellent for food storage whether for dry storage or use in the freezer. The sealer is an excellent component of your sous vide cooking system. The bags can be opened to remove or add product and then vacuum sealed again. The bags do not need to be cut open. This unit ships with 25 one-quart bags and 25 one-gallon bags.
2. Platinum Silicone Sealing Rings Gaskets for Leak Proof Mason Jar Lids (10 Pack, Regular Mouth)
- 10 Reusable Seals for *Regular Mouth* Mason Jar Lids. Regular Mouth Mason Jars are 2 3/8″ Internal Diameter.
- Leak Proof and Air Tight – For Ball plastic storage caps, MJL stainless steel storage lids, and many other lids.
- Fits and Seals Better Than Other Brands – Thicker and with a groove. The groove goes up, toward the top of the lid.
- Safest Material – BPA and Plastic Free. Made of platinum cured silicone rubber, these seals are dishwasher, freezer, and microwave safe! Silicone is a safe, green, material for food use that does not leach chemicals. Platinum cured silicone is more expensive and higher purity than FDA food grade silicone.
- Many Uses – Perfect for fridge and freezer storage, pantry storage, transporting food or beverage without leaking, home made fermenting lids, and much more! Not for canning.
Our silicone sealing lid liners are also available on Amazon, they completely cover the inside of the lid!
One piece plastic or metal storage lids are super convenient when you are storing things in the fridge or pantry, but most of them are not air tight and leak proof. These seals will fix that!
The regular mouth seals are 70mm outside diameter, 50mm inside diameter, and 2.6mm thick.
These seals will also fit our regular mouth stainless steel storage lids and stainless steel straw hole lids.
Holding the lid under hot running water will help if you are having trouble removing the lid.
3. Shrink Bag 100 PCS Heat Shrink Wrap Bags 9×14 Inch 100 Gauge for Wrapping Bath Bombs, Soaps, Oil and Homemade Goodies
4. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
5. Persys Medical Israeli Emergency Bandage 4"
6. SOHLER 5 Gram Pack of 50 Silica Gel Desiccant Packets Drying Agent Moisture Absorber Dehumidifiers (Ship from USA)
- Provide maximum absorption of humidity and can prevent mold, mildew, rust, fungus, and corrosion.
- Usages: dry out wet cellphone, keep shoes dry, help keep photos safe and free from moisture, keep important documents safe, prevent tarnish on gold or silver, prevent your valuable camera from moisture, keep your leather items stay away from mold and moisture, keep jewelry boxes from excess moisture and protect your valuables, etc…
- Packaged desiccants are low-cost, efficient desiccants that protect the contents of a properly sealed package or container during storage or shipping.
- Package includes: 50 desiccant packets. 5 gram each packet.
- Packet dimensions: 2.12”x 1.75” (inch).
Silica gel packets are used to absorb moisture and keep things dry. They are ideal to reuse throughout your home in places where you might be worried about excess moisture. The gel is highly absorbent and capable of drawing water molecules without any chemical reaction, structural change or side effects. Even when saturated with water, silica gel keeps its dry surface.
7. Pressure Sensitive Torque Activated Cap Seals Liners -100 PCS – for Regular Mouth Glass & Plastic Ball Mason Canning Jars – No Induction Sealer Needed – 70 mm (2.75") Made in USA
- PRESSURE SENSITIVE SEAL LINERS provide an extra level of protection compared to a basic foam liner. The polystyrene white foam coated liner insert seals for jars PREVENT LEAKS and CONTAMINATION, and preserve FRESHNESS of your dry or powder products.
- SEALING INSERTS provide an actual safety seal for different canning jars. These jar inner seals are coated with a torque activated coating. They are adhesive to GLASS and PLASTIC jars, and round containers with metal or plastic caps and closures.
- 2.75 inches (70 mm) in DIAMETER, these jar sealers are used with any type of REGULAR MOUTH jars, jugs, pots, cans or other round neck containers, which are made of glass or plastic, and measure slightly less than 70 mm in outer diameter neck size.
- NUMBER 1 ADVANCED sealing technique used by professionals! NO INDUCTION SEALER or SHRINK BAND NEEDED with these liner seals. NO TOOLS, or heat gun REQUIRED! Just center your seal on the jar apply the cap and wait for 24 hours to adhere.
- SEALED FOR YOUR PROTECTION – this press and seal liner, cap sealer, will keep your herbs and spices dry and fresh! This single-use foam seal peels easily from container when needed.
These polystyrene jar foam liner seals coated with torque-activated adhesive
require no tools and no heat induction equipment.
For proper application consider the following recommendations:
● Make sure your pressure sensitive liner size matches the jar opening.
These 70 mm (2.75 inches) seals are to be used with regular mouth jars
that measure 2 3⁄8 in (60 mm) inner and 2 3⁄4 in (70 mm) outer diameter neck size.
● Completely clean the jar top with clean cloth and alcohol to clear of liquid
and/or solids. Center jar seal on top of you plastic or glass jar, and apply. The white
side of the seal shall be facing down, the side with red letters shall be facing up.
● Screw metal or plastic cap on jar. Make sure the liner and cap are tightly secured
on the container.
● Once the cap is applied, it should not be removed for at least 24 hours
to ensure proper adhesion. Although depending on your application, the adhesion
process might take significantly less time.
● Seals can be used with glass and plastic jars and with lined or unlined caps.
These pressure sensitive liners are best for use with powder or dry products.
● Avoid overfilling your containers!
● Once seal is removed, it cannot be reapplied.
8. Craftsboys 530pcs 2:1 Heat Shrink Tubing + Hot Air Gun, Heat Gun, Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit
- Tube Material:Made of Polyolefin, Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)
- Length: 45mm, Internal Diameter: 1.5mm/2mm/3mm/4mm/5mm/6mm/8mm/10mm，Shrinking ratio: 2:1
- Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc
- Heat Gun: 3.3 FT Long Cable. Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
- Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
-2:1 Shrink Tube x 530pcs
-Heat Gun x 1
(Quantity x Supplied internal diameter)
80pcs x 1.5 x 45mm approx.
160pcs x 2.0 x 45mm approx.
60pcs x 3.0 x 45mm approx.
100pcs x 4.0 x 45mm approx.
30pcs x 5.0 x 45mm approx.
20pcs x 6.0 x 45mm
20pcs x 8.0 x 45mmapprox.
20pcs x 10.0 x 45mm approx.
20pcs x 10.0 x 45mm approx.
20pcs x 10.0 x 45mm approx.
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C maximum
Operating Temperature: -55°C to + 125°C
Supplied internal diameter: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm,10mm
Item Shape: Round/Flat
Color: Black, Red, Blue, Yellow, Green,Clear
9. Poultry Shrink Bags 12"x16" (100pk) Zip Ties and Labels, BPA/BPS Free, 3 MIL, Freezer Safe
- The only bags on the market both BPA and BPS FREE!
- 12×16 inch (fits poultry 7-13lbs), ties and labels included
- 70 micron thick (thickest on the market), 7 layer protection, no rip guaranteed
- Simply dip in hot 180°-190° clean water for 3-5 seconds
- instructions included
- no need for environment polluting straws!
- MADE IN THE USA, Commercial-grade!
By our suggestions above, we hope that you can found Vacuum Sealing Gun for you.Please don’t forget to share your experience by comment in this post. Thank you!