Top 9 Water Loop Cooling

The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.

 P/N: CL-W216-CU00SW-A

Dimension: 518(L) x 198 (W) x 223 (H)

Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775

AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)

Components Dimension         

Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm

Radiator : 39.9 (H) x 120.7 (W) x 273 (L)

Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm

Fan Spec: 1500 RPM (1000RPM with LNC)

Coolant: Pure Clear Coolant

Kit Contents   

CPU Water Block

– Pacific W3 CPU Water Block x1

Pump/Reservoir

– Pacific PR15-D5 Pump/Reservoir Combo x1

Radiator

– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1

Fittings

– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6

– Pacific G1/4 90 Degree Adapter – Chrome x2

Fan

– Riing 12 LED RGB 3 Pack x1

Coolant

– Thermaltake C1000 Pure Clear Coolant x1

Tube

– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1

Accessory

– Silicone Insert 900mm Tt Premium Edition

– Intel and AMD Universal Backplated & Mounting Kit

– 24pin ATX Bridge Tool x1

– Thermaltake Thermal Grease x1

Usages:

Protect you When you are under the Sun, stand in the Wind, Dust and Sand

Material:

Made of 100% Soft Ice Silk, absorb sweat and quick drying, comfortable wearing

Features:

1. Exquisite sewing, high elasticity, fitted and non-slip

2. Realistic 3D Digital Print

3. Thin and lightweight, breathable without feeling smothered

4. The ends are designed as Non-lockstitch for better elasticity but not “broken”

5. Using as half face Scarf, headband, scarf, neck gaiter, wrist band, headwrap, balaclava, bonnet, neckerchief and so on for various activities

Size:

7inch X 9.8inch.(LXW), Stretchable circumference is about 21.25-25inch. One size fits most ( adult & kids).

The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.

The LC240E RGB incorporates Cooler Master’s Dual Chamber Pump, 120mm Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you’re building new or just upgrading, it’s easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components. Specifications

• Dosage: Mix with 1 Gallon of DI or distilled water
• Shelf Life: 2 Years, Unopened

Compatibility

ReBoot is compatible with rigid and flexible tubing of all sizes.

Included Parts

• 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)