520 reviews analysed
1. 1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan
Feature
- The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast
- it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.
- please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out
- please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included).
Description
Specification:
Product size:Approx.180x90x80mm (please allowed 1-3mm error)
Heater ring inner:70mm (Recommended crucible+quartz suit,maximum support of 58mm crucible)
Power supply:
New style :AC 100-220V Adapter
Old style: Main board Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12V≥10A , 15V above≥15A
NOTE:New style and Old style shipped by randomly!!!
It doesn’t affect the performance of product.!!!
Maximum power: 1800W
Maximum current: 40A
Package Content:
1 x PCB board
1 x 48V copper tube
1.The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. you can buy a small water pump and 2 meters of rubber hose(inner diameter is 4mm) for build a water cooling system
Please pay attention to using switch power supply, because output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit that will be lead to circuit can’t afford to vibrate caused by lacking voltage,so that the two MOS tube conduction and components will burned
comes with heating circle diameter-60 mm/design voltage-36V,if you use more than 40V Devices shall be used ≥70 mm diameter heating ring, DC 12V water pump use, please use separate power supply voltage regulator module to avoid fan and water pump are burn out
The minimum input is 12V, but it doesn’t mean all 12V power supply available,The module has specific requirements on voltage and current , 12V require current must than 10A ,output power will greatly reduced if the power is too low ,which will lead to two MOS conduction at the same time & burn MOS tube when lower than 12V
2. Bewinner 2000W High Voltage Induction Heater Module Flyback Driver Heating Board(US Plug 100-240V)
3. ZVS Induction Heating Board Module1800W 40A Low Voltage Flyback Driver Heater
Feature
- This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect
- 12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation
- Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient
- With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- It is recommended not to exceed 48V 35A to prevent accidents and damage
Description
Specification:
Input Voltage: 12V-48V (Recommendation: above 36V)
Power Requirments: Less than 12V >=10A, More than 15V >=15A
Maximum Power: 1800W
Maximum Current: 40A
Heater Inner Ring: 70mm / 2.8in
Size: 18 * 12 * 9 cm / 7.1 * 4.7 * 3.5in
Weight: Approx. 1052g
Package Included:
1 x PCB Board
1 x Copper Tube
Note:
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very dangerous.
4. Sunny Bay XL Body Heating Pad 10.5" x 24", Washable Cover, Heat Therapy Pad for Sore Neck, Back & Shoulder Muscle Pain Relief – Reusable, Non-Electric Heat or Cold Compress, Cody Copper
Feature
- Fleece, Cotton
- Made in USA
- PAIN RELIEF: Release muscle tension and pain in neck and shoulders in the office, car, or at home
- THERAPEUTIC: Easy to heat in the microwave, our ergonomic soft pillows stay put to treat pain deeply
- COMFORTABLE: Whole grain fill and washable soft fleece cover hold heat for up to 30 minutes
- HOT-COLD USE: Use as a heat pack for the pain relief behind the head or use as a cold wrap
- REUSABLE: Can be heated in the microwave or cooled in the freezer over and over for reliable relief
Description
Sunny Bay Extra Large lower back pain therapy heating pad is for quick pain relief and recovery. Get your lower back pain therapy while on your break or on your job, as often as you like! The extra large microwavable heating packs can be microwaved or freeze to desired temperature. BioMed DB Design’s heating packs massage your muscle and heal your wounds faster. The heat action can be used for deeper heat penetration. Reusable, washable professional portable massage heating pad is perfect for you.
5. Sunny Bay Lower Back and Shoulder Heat Wrap with Strap, 10"x18" Heating Area, Microwave Hot/Cold Pad, Reusable, Portable, Navy Blue
Feature
- 100% polyester, 100% cotton
- Made in the USA and Imported
- Treats shoulder and lower back muscles, large heating area, 10″ by 18″. Weighs 2.5 lbs
- Ideal for shoulder joint pain and lower back pain. Treats back and shoulder muscle groups.
- The wrap is long enough for most people. It stays on the shoulder or around your waist when you move around.
- The heat lasts for half an hour. Fleece protects the skin from excessive heating and burns. Great for knee pain also.
- Filled with all-natural flax seeds. The heat wrap is constructed with multiple channels so the filling will not shift to one end during use.
Description
Ergonomically designed, this Microwavable Lower Back and Shoulder Joint Wrap is ideal for everyday lumbar or shoulder and back pain therapy. It can be tied around the lower back, waist, knee, or shoulder. The cover is made of soft fleece and protects your skin from burning and also retains heat. This hot/cold pain relief pack wraps around your body and stays secure with the tying straps. It is filled with flax seeds divided into multiple chambers so that the filling remains in place when you move around. Just microwave it for a minute or so to enjoy the heat. Or freeze it for an hour to use it as a cold pack. The back wrap measures 63″ x 10″, long enough for all sizes. The heating portion measures 10″ x 18″.
6. Microwavable Heating Pad by Sunny Bay: Washable Heat Therapy with Cotton Cover for Sore Neck & Shoulder Pain Relief, Personal, Reusable, Non Electric Thermal Deep Muscle Hot Pack or Cold – Blue
Feature
- PAIN RELIEF: Release muscle tension and pain in neck and shoulders in the office, car, or at home
- THERAPEUTIC: Easy to heat in the microwave, our ergonomic soft pillows stay put to treat pain deeply
- COMFORTABLE: Made in USA! Flax seeds fill and washable soft cotton cover hold heat for up to 30 minutes
- REUSABLE: Can be heated in the microwave or cooled in the freezer over and over for reliable relief
- HOT-COLD USE: Use as a heat pack or a cool therapy compress, it is more comfortable than the gel ice wraps
Description
This microwavable neck heat wrap spreads out onto the shoulders, back, neck, and collarbones. It is larger and covers more of the shoulder than other styles, measuring 15 inches by 15 inches with 1 inch thickness. It is softer and spreads out more, providing more coverage of hot and cold treatment and less weight concentrated in one area. The area behind the neck on the neck wrap is 6 inches long and reaches the shoulder blades in order for the microwavable neck heat wrap to get into the areas where people need it most. The fabric of the neck heat wrap is made of 100% cotton. It is safer from fires because it has a higher burn point than pillows made of polyester, however users should still be careful of overheating their pillows. The fabric on this microwavable neck heat wrap is thinner than that of other pillows so you can feel the hot and cold more directly.
7. Sunny Bay XL Body Heating Pad 10.5" x 24", Whole Wheat Filled, Washable Cover, Heat Therapy Pad for Sore Neck, Back & Shoulder Muscle Pain Relief – Reusable, Non-Electric Heat or Cold Compress, Black
Feature
- PAIN RELIEF: Release muscle tension and pain in neck and shoulders in the office, car, or at home
- THERAPEUTIC: Easy to heat in the microwave, our soft pads target muscle tissue soreness deep down
- COMFORTABLE: Whole grain fill and washable soft fleece cover hold heat for up to 30 minutes
- HOT-COLD USE: Use as a heat pack or remove the fleece cover for quick conversion to cool therapy
- REUSABLE: Can be heated in the microwave or cooled in the freezer over and over for reliable relief
Description
Sunny Bay Extra Large lower back pain therapy heating pad is for quick pain relief and recovery. Get your lower back pain therapy while on your break or on your job, as often as you like! The extra large microwavable heating packs can be microwaved or freeze to desired temperature. BioMed DB Design’s heating packs massage your muscle and heal your wounds faster. The moist heat action can be used for deeper heat penetration. Reusable, washable professional portable massage heating pad is perfect for you.
8. Microwavable Thermal Heating Pad Compress: Large Heat Therapy Pads for Sore Upper Back, Neck & Shoulder Pain Relief – Personal, Reusable, Non Electric Deep Muscle Hot Pack or Cold Wrap – Navy Blue
Feature
- ✔️ PAIN RELIEF: Release muscle tension and pain in neck, shoulders, upper back, chest, legs, and more
- ✔️ THERAPEUTIC: Easy to heat in the microwave, our soft pads target muscle tissue soreness deep down
- ✔️ COMFORTABLE: Flax seeds and washable soft fleece cover hold heat for up to 30 minutes of pain relief
- ✔️ HOT-COLD USE: Use as a heat pack or remove the fleece cover for quick conversion to cool therapy
- ✔️ REUSABLE: Can be heated in the microwave or cooled in the freezer over and over for reliable relief
Description
PAIN RELIEF
Sunny Bay’s versatile heating pack will quickly become your go-to solution for muscle pain, soreness, and tension caused by intense training or accidental tweaks that can happen during daily activities. Simply pop it in the microwave or freezer for the best hot or cold therapy for your aching body.
THERAPEUTIC Whether you need a warmer on cold, wintry days or a cold pack for overworked muscles in warm weather, our therapeutic pads have you covered. Each pack holds in heat for 30 minute intervals, maximizing your relief for fast and efficient recovery. Stow packs in your day bag or luggage for daily relief during travels near and far.
COMFORTABLE
Each pack is filled with flax seeds for a flexible fit around your target areas. Whether you’re standing up or moving around in your office chair, the pack stays put. Our washable fleece cover retains warmth and is designed to protect your skin from the long-lasting heat stored inside. You’ll feel better in practically no time!
HOT-COLD USE Forget gel packs or ice cubes melting through ragged towels. Our heat pads handle hot and cold treatment with ease. Pop it in the microwave for quick heating, or remove the cover and place it in the refrigerator or freezer to chill for fast soothing. It’s perfect for muscle aches and pains from your shoulders, upper back and abdomen to your hips, thighs, calves and feet.
REUSABLE
No matter how many times you use it, our heat pack is ready for more. From the filling to the cover, we designed every detail to stand up to heavy, repeated use to provide you with consistent muscle pain relief on demand. Simply toss the easy-to-remove cover in the wash to clean.
-Sunny Bay Microwavable Thermal Heating Pad -Relieves Muscle Tension and Pain
-For Hot or Cold Muscle Therapy -Removable, Washable Fleece Cover
-20 x 17 x 1
9. Yosoo DC12-36V 20A 1000W DIY ZVS Induction Heating Board Eletronic Supply Module Heater with Copper Tube
Feature
- Heating plate with large PCB design, component layout is sparse to heat dissipation.
- Power line design can increase the current heat radiation and makes the board smaller and more stable.
- Anti static 42*35 large heat sink ensures a good heat dissipation effect.
- The output end of the three pillars of parallel and 300V/25A terminals, two output modes, easy to use under different requirements.
- The positioning hole and the positioning hole of the heat radiating fan of the board and the 9*9cm are exactly matched with the positioning hole of the board, and the 12V power supply is directly inserted on the board.
Description
Specifications:
Input Voltage: 12V-36V( recommended 24V)
Power Requirements:
less than 12V ≥5A
more than 15V ≥10A
Assembled Size: 90 * 180 * 65mm / 3.54 x 7.08 x 2.56″
Package Includes:
1 x Heating Module
1 x Copper Tube & Other Accessory
Note:
This kit requires electronic knowledge and ability, please make sure you know how to assemble and use it.
10. Yosoo Low Voltage Induction Heating Board Module Tesla Coil 12V-48V Flyback Driver Heater DIY with Coil 1000W ZVS
Feature
- Eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
- 24V input with no load current of 3A , 48V input with no load current of 6A.
- The first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
- Line provides excellent service and longevity
- GREAT CUSTOMER SERVICE: If you have any inquiry, please don’t hesitate to email us, we will give you a response within 24 hours.
Description
Note:
1. The kit contains a full set of driving circuit elements and brass
2. Buyers need to bring their own power and cooling unit.
3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
4. The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
Conclusion
By our suggestions above, we hope that you can found Yosoo Induction Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!
